Die Überfüllsicherung LS 300/500 für aggressive nicht brennbare und brennbare Flüssigkeiten der Gefahrklasse AI besteht aus einem Sensor im Tank (LS 300) und einem Messumformer mit Alarmeinrichtung und Schaltausgang (LS 500). Die elektrische Verbindung zwischen dem Sensor und dem Messumformer erfolgt durch ein zweiadriges Kabel. Am Ansprechpunkt des Sensors befindet sich ein gekapselter Kaltleiter, dessen sich verändernder Widerstandswert von der Elektronik ausgewertet wird. Eine integrierte Scannerfunktion überprüft permanent die korrekte Funktion des Sensors. Die individuelle Ansprechlänge für den jeweiligen Behälter kann im Einschraubkörper leicht justiert werden.
The overfill protection device LS 300/500 for zone 0 is a safe solution for non-explosive and explosive materials. It is used in all process, storage and transport tanks containing liquids. The device consists of a sensor in the tank (LS 300) and a transducer with alarm and output terminal (LS 500). The electronic connection between the sensor and the transducer is made with a two-wire cable. At the threshold point of the sensor is an encapsulated PTC-resistor. The PTC-resistor is a variable resis-tance whose resistance value increases with the rising temperature. The correct functioning of the sensor is continuously monitored by an integrated scanner. The individual threshold length for each tank can be easily adjusted by shifting the probe tube in the screw-in unit.
Top Products 489
Unsere Webinar-Empfehlung
Der Webcast MTP und modulare Produktion bietet eine einzigartige Gelegenheit, mehr über die aktuellen Entwicklungen bei MTP und in der modularen Produktion zu erfahren.
Chemie- und Pharmaproduktion braucht mehr Flexibilität
In der heutigen sich schnell wandelnden Welt stehen…
Teilen: